Затопило гараж | Ржавый стол, кондиционер и спойлеры по BigBlock

A short garage vlog filmed on a phone. In the morning, I got a call saying that I was leaking water to the neighbors. I came to the garage and found water on the floor, the workbench wet, and some metal boxes already starting to rust. The reason was simple: the air conditioner was left running, and the condensate drains into a canister because there is no proper drain in the garage. After a few days, the canister overflowed, and the water spread across the workbench and floor. Now the main question is what to do with the workbench. It started to rust, but painting it is not a good option: parts are placed on it and welding work is done there. If I fully sand the surface, I may remove the factory coating, and the table may start rusting even more. Let me know in the comments how to remove the rust and protect the workbench without damaging the surface. In the second part of the video, there are a few spoilers for upcoming episodes. I check the test stand dashboard, show Malossi MHR and Piaggio CDI modules, the original Vespa ignition coil, and think about how to mount the CDI and ignition coil. Coming soon: the first start, wiring assembly, and a BigBlock setup configuration. Scooter engine test stand project: Part 1 —    • Строю стенд для скутерных двигателей | Pia...   Part 2 —    • Доводим стенд для скутерных двигателей до ...   Vespa project: Part 1 —    • Подготовка Vespa к покраске | Царапины, шп...   Chapters: 00:00 Filming a vlog on the phone 00:03 Call: “You are leaking water to the neighbors” 00:11 Arriving at the garage 00:16 Water on the floor 00:22 The air conditioner was left running 00:26 Condensate was draining into a canister 00:32 Several days without checking it 00:40 The workbench was covered in water 00:49 The table and metal started to rust 01:00 Cleaning up the big puddle 01:10 Trying to pump the water out 01:25 Now everything needs to dry 01:29 Why it is important to turn off the AC 01:34 What should I do with the workbench? 01:43 Steel 45 or steel 50 01:54 How to remove rust without removing the coating? 02:09 Why I cannot simply paint the table 02:15 Checking the test stand dashboard 02:43 Dashboard color after painting 02:46 Dashboard assembly is coming soon 02:50 Spoiler: first start is coming 02:55 Wire and CDI mounting points 03:01 Malossi MHR and Piaggio CDI modules 03:19 Checking the second CDI module 03:28 Plan for mounting the CDI 03:44 Wire to the ignition coil 03:54 Original Vespa ignition coil 04:01 Need to make an ignition coil mount 04:12 Possible ignition coil locations 04:28 Tested CDI and coil setup 04:38 Trying the stock configuration 04:42 Stock cylinder and PM Tuning head 04:47 Spare CDI options 05:00 Parts for the future Vespa restoration 05:22 Vlog wrap-up and question to viewers 05:36 Question about restoring the workbench 05:42 Question about BigBlock coils and ignition modules Subscribe to Johnny Bear for more engine test stand work, first starts, wiring, BigBlock, Vespa, garage experiments, welding, painting, car and motorcycle projects. Hashtags: #JohnnyBear #GarageVlog #MotorcycleGarage #BigBlock #Vespa