P32 Workhorse chassis Master Cylinder & Hydroboost Removal
In restoring my 25 year old P32 Workhorse based motorhome, I needed to replace the master cylinder and the hydroboost hydraulic booster. These are located underneath the driver's feet and access is limited by a large sheet metal shield that protects the brake components. I show how to remove that shield, and then how I removed the master cylinder and hydroboost. In a future video I'll replace the master cylinder and hydroboost. 00.00 Intro 01:31 Remove shield for access 05:30 Irish Setters visiting 05:53 Removing the Master Cylinder 10:03 Hydroboost removal 18:21 Master Cylinder and Hydroboost on the bench This is part of a series of videos on the restoration of my 25 year old Georgie Boy Pursuit Motorhome that is based on a Workhorse P32 chassis. These Workhorse chassis were used on many brands of class A motorhomes so the series below can be applied widely to older motorhomes based on the same chassis: An overview of the renovation of my Georgie Boy Pursuit Motorhome on a Workhorse P32 Workhorse chassis can be found at: • Intro to 2000 Workhorse motorhome renovation &t=0 Videos of the front suspension: Installation of a new Steering Stabilizer from Safe T Plus: • steering stabilizer for P32 Workhorse Moto... Installation of an Aftermarket Front Anti Sway Bar: • Front Sway bar Installation for P32 Workho... Installing new coil springs and shocks: • Replacement of front ball joints in workho... Replacing the front lower ball joints: • Replacement of front ball joints in workho... &t=0 Front Coil Spring removal - • Front Coil Spring Removal in a 2000 Workho... Videos of the rear suspension are below: Removal of the rear leaf springs to replace the bushings and shackles: • Leafspring removal with replacement of bus... &t=0 How the rear anti-sway bar bushings were replaced: • Rear sway bar bushing replacement in year ... &t=0 Replacement of the rear shock absorbers: • Rear shock replacement on year 2000 Workho... I removed old rear firestone air springs and replaced them with rear Sumo springs: • sumo spring installation in Workhorse RV c... I replaced the rooftop Air Conditioner: • Eco cool RV Air Conditioner Rear Brakes videos are here: Installing the rear hub, drum and half axle • Rear drum brake, hub and half axle assembl... Removing rear hubs from drum and replacing bearings: • Replacing rear wheel bearings in a P32 Wor... Reassembling the rear brake drum shoes: • rear brake assembly Backplate reinstall with new wheel cylinder and brake lines: • Reinstalling rear backplate with new wheel... The difficult removal of the right rear brake drum is here: • Removing a P32 Workhorse rear brake drum t... The easier removal of the other (left) rear brake drum: • Rear brake drum removal p32 workhorse chas...

Fitting a Workhorse master cylinder with a new hydroboost.

WORKHORSE P32 BRAKES - Video #4 - Hydroboost Upgrade

Honda Gold Wing Winnipeg Ride 688

Workhorse P32 Coil Spring Replacement

Replacing the front hubs on my Motorhome

Greasing the front chassis of my 2000 P32 Workhorse Motorhome

The 'Strange' British Armoured Car That Hunted German Tanks Instead Of Running From Them

Workhorse Hydro-Max Master Cylinder Repair When Dashboard ABS Brake Light Wont Go Off / Stays On

Hydroboost Failure, and Installation

The reason my Workhorse motorhome vortec engine seized.

Rare Old Engines Starting Up Sound That Will Blow Your Ears ▶18

Revealing The SPECIAL TECHNIQUE Of A Pakistani Man To EXTRACT GOLD From Used Motherboard Waste

GOT BRAKES? | Restoration and how to find parts for older motorhome brake systems

They Said This Stuck Unimog Was Unrecoverable: Can It Be Saved?

Replacing Workhorse W22 Brake Rotors

How NOT to Blow Up Your 8.1 Vortec Engine in Your WorkHorse Chassis with Engine Temperature Alarm

2002 Workhorse Chassis Fuel Pump replacement #2

Rear drum brake, hub and half axle assembly onto a 25 year old Workhorse P32 chassis based motorhome

