Fitting a Workhorse master cylinder with a new hydroboost.

I bench assembled and fit a new hydroboost and new master cylinder to the original brake pedal linkage for my 2000 Workhorse P32 based motorhome. I will install it in the motorhome in an upcoming video. 00:00 Intro 01:11 Background 06:31 Aluminum sleeve for master cylinder 11:00 Spacer between master cylinder and hydroboost 12:35 Steel sleeve for brake linkage 13:15 Transfer Brake linkage to new hydroboost 19:53 Bench assemble system Links to my other motor home videos are below: An overview of the renovation of my Georgie Boy Pursuit Motorhome on a Workhorse P32 Workhorse chassis can be found at:    • Intro to 2000 Workhorse motorhome renovation  &t=0 Videos of the front suspension: Installation of a new Steering Stabilizer from Safe T Plus:    • steering stabilizer for P32 Workhorse Moto...   Installation of an Aftermarket Front Anti Sway Bar:    • Front Sway bar Installation for P32 Workho...   Installing new coil springs and shocks:    • Replacement of front ball joints in workho...   Replacing the front lower ball joints:    • Replacement of front ball joints in workho...  &t=0 Front Coil Spring removal -    • Front Coil Spring Removal in a 2000 Workho...   Videos of the rear suspension are below: Removal of the rear leaf springs to replace the bushings and shackles:    • Leafspring removal with replacement of bus...  &t=0 How the rear anti-sway bar bushings were replaced:    • Rear sway bar bushing replacement in year ...  &t=0 Replacement of the rear shock absorbers:    • Rear shock replacement on year 2000 Workho...   I removed old rear firestone air springs and replaced them with rear Sumo springs:    • sumo spring installation in Workhorse RV c...   I replaced the rooftop Air Conditioner:    • Eco cool RV Air Conditioner   Brake system videos are here: Fitting a Workhorse master cylinder with a new hydroboost and original brake pedal linkage    • Fitting a Workhorse master cylinder with a...   Removing the master cylinder, hydroboost and brake pedal linkage    • P32 Workhorse chassis Master Cylinder & Hy...   Installing the rear hub, drum and half axle    • Rear drum brake, hub and half axle assembl...   Removing rear hubs from drum and replacing bearings:    • Replacing rear wheel bearings in a P32 Wor...   Reassembling the rear brake drum shoes:    • rear brake assembly   Backplate reinstall with new wheel cylinder and brake lines:    • Reinstalling rear backplate with new wheel...   The difficult removal of the right rear brake drum is here:    • Removing a P32 Workhorse rear brake drum t...   The easier removal of the other (left) rear brake drum:    • Rear brake drum removal p32 workhorse chas...