Greasing the front chassis of my 2000 P32 Workhorse Motorhome

There are two parts to this. First I introduce a new tool, my Ryobi electric grease gun, and then I show details to finding and greasing all the zerk fittings on both the right and left side of the front chassis. Please see below for the introduction video and other videos on the renovation of my 2000 Georgie Boy class A motorhome built on a P32 Workhorse Chassis. 00:00 Intro 00:38 Planning 01:46 New Tool 04:17 Greasing the right front chassis 08:09 Greasing the left front chassis An overview of the renovation of my Georgie Boy Pursuit Motorhome on a Workhorse P32 Workhorse chassis can be found at:    • Intro to 2000 Workhorse motorhome renovation  &t=0 Greasing the front chassis:    • Greasing the front chassis of my 2000 P32 ...   Window shade installation:    • Window shades for the RV   Interior finishing details:    • interior finishing details of our 25 year ...   Videos of the front suspension: Installation of a new Steering Stabilizer from Safe T Plus:    • steering stabilizer for P32 Workhorse Moto...   Installation of an Aftermarket Front Anti Sway Bar:    • Front Sway bar Installation for P32 Workho...   Installing new coil springs and shocks:    • Replacement of front ball joints in workho...   Replacing the front lower ball joints:    • Replacement of front ball joints in workho...  &t=0 Front Coil Spring removal -    • Front Coil Spring Removal in a 2000 Workho...   Videos of the rear suspension are below: Removal of the rear leaf springs to replace the bushings and shackles:    • Leafspring removal with replacement of bus...  &t=0 How the rear anti-sway bar bushings were replaced:    • Rear sway bar bushing replacement in year ...  &t=0 Replacement of the rear shock absorbers:    • Rear shock replacement on year 2000 Workho...   I removed old rear firestone air springs and replaced them with rear Sumo springs:    • sumo spring installation in Workhorse RV c...   I replaced the rooftop Air Conditioner:    • Eco cool RV Air Conditioner   Brake system videos are here: Fitting a Workhorse master cylinder with a new hydroboost and original brake pedal linkage    • Fitting a Workhorse master cylinder with a...   Removing the master cylinder, hydroboost and brake pedal linkage    • P32 Workhorse chassis Master Cylinder & Hy...   Installing the rear hub, drum and half axle    • Rear drum brake, hub and half axle assembl...   Removing rear hubs from drum and replacing bearings:    • Replacing rear wheel bearings in a P32 Wor...   Reassembling the rear brake drum shoes:    • rear brake assembly   Backplate reinstall with new wheel cylinder and brake lines:    • Reinstalling rear backplate with new wheel...   The difficult removal of the right rear brake drum is here:    • Removing a P32 Workhorse rear brake drum t...   The easier removal of the other (left) rear brake drum:    • Rear brake drum removal p32 workhorse chas...