Мельницы для специй на токарном своими руками.

Sharpening, searing, testing: the entire process in detail - how to make it from oak and birch firewood. !!! WELCOME to my Telegram channel https://t.me/HSL_MikhailDemin !!! I had a request to make a spice grinder as a gift. I used a 135 mm long mechanism with ceramic millstones as a base (link below). For the body, I used a naturally dried birch log (3 years) and an oak log from a sauna woodshed (also 3-4 years old). The entire process is shown in detail in the video. Main diameters and depths: in the mill body - 42x20 mm, then 38x35 mm, then 25 mm through; in the mill lid - 22x40 mm. I finished the surface with 120, 180, 240, and 320 grit sandpaper. I sanded it with a mixture of petroleum jelly and beeswax—the original weight ratio was 4:1. I added about 10% carnauba wax to this mixture. Everything was mixed at a temperature of 80-90 degrees. I finished the sanding with oil-wax to prevent burrs in the wood grain. The final design is simple and attractive. The dimensions of the birch mill are: height 160 mm, maximum diameter 60 mm, minimum 50 mm. The oak mill is 1-2 mm smaller in all dimensions. Buy mill accessories: https://mossklad.ru/_RCATPAGE/u361/u381 Buy the exact mechanism shown in the video: https://mossklad.ru/_PRODUCTPAGE/2677247 Making HUGE spice mills:    • Размер впечатляет! Мельницы для специй на ...   Making spice jars:    • Хранение специй на кухне / Банки для сухих...   Timecodes: 00:00 Introduction 00:18 Where to buy the mechanism (link just above) 00:47 How the mill works 01:29 Preparing firewood blanks 03:10 Marking the external dimensions and dividing the blank into the body and lid of the mill 04:27 Obtaining an oak blank from a regular log 05:09 Internal machining of the mill body 12:03 Internal machining of the mill cover 14:04 External machining of the entire mill 15:10 Finishing the top of the cover 16:23 "Staining" the oak with a special compound 16:52 Pressing the mechanism into the cover and body of the mill 17:56 Review and testing of finished products I buy turning tools here: https://mossklad.ru/_RCATPAGE/u361/u471 Review of the Record Power BS300E band saw:    • Новая ленточка 12“: сборка, регулировка, з...   Review of the Record Power PT260 planer and thicknesser:    • Новый фуганок-рейсмус: сборка, запуск, обзор   Review of the Record Power Coronet Herald wood lathe:    • Обзор, тест и нюансы - будьте в курсе, даж...   Record Power SC2 Lathe Chuck Review:    • Интересный патрон по дереву: золотая серед...   Record Power SC4 Lathe Chuck and Faceplate Review:    • Обзор и подготовка к работе комплекта Reco...   AC400 Air Filter Review:    • Пылеуловитель Record Power AC400   Record Power WG200 Sharpener Review:    • Заточный станок Record Power WG200. Обзор ...   Record Power WG250 Sharpener Review:    • Махнул не глядя - новый заточной станок   Review of F3, S1, F5, F6 Lights:    • Обзор и тест светильников для мастерской.   Purchase the lights here: https://mossklad.ru/_RCATPAGE/u506/u295 Recommended channels: Ivan Baev:    / иванбаев   VORON-M:    / @voronm   You can watch all my videos here:    / @mikhail_demin