Installation Steps - How to Install Turbo Cartridge for 2013-2020 FORD FUSION

🛒Buy Now: https://www.maxpeedingrods.com/produc... https://www.amazon.com/dp/B0DL5MCSKV This repair was done on a FORD FUSION The process should be similar on the following vehicles: Compatible for Ford Fusion L4 1.5L Turbocharged B0BG 2014-2020, compatible for Ford Escape L4 1.5L Turbocharged B0BG 2017-2019, Tools Needed: Rubber mallet Large impact wrench Medium impact wrench Large torque wrench Snap ring pliers Medium ratchet wrench 10mm ratchet wrench Marker pen Flathead screwdriver Needle-nose pliers Small ratchet wrench Small extension bar (short, long, and universal joint types) 13mm socket for medium ratchet 7mm socket 8mm socket 10mm socket 11mm socket 13mm socket 14mm socket Adapter: medium-to-small, large-to-small, and large-to-medium Pry bar ⚠ Important Note: The content in this video is intended for general guidance and educational purposes only. While Maxpeedingrods makes every effort to ensure accuracy, all vehicle repairs and installations should be performed with proper knowledge, tools, and safety precautions. Working on your vehicle involves inherent risks. Always consult your vehicle’s service manual and, when in doubt, seek assistance from a certified technician. Maxpeedingrods is not responsible for any injury, damage, or loss resulting from the use or misuse of the information provided in this video. Follow Us :    / @maxpeedingrods     / maxpeedingrods