TOTIM® Racing Polyurethane Foam Seats for Radical

TOTIM® Racing Polyurethane Foam Seats for Radical - BORNTORACE Advanced technology and ergonomic design for an unparalleled driving experience Building Time 15 minutes Waiting time for cutting/use after 1 hour TOTIM has revolutionized how custom-fit "poured" racing seat inserts are made! These unique kits are fully sealed, no measuring and no mess, no additional covering required and can be fitted in as little as 30 minutes with no other tools required Not only does the foam absorb impacts during an accident, but the material also serves to offer total support to the body during racing. Each kit consists of pre-packaged, pre-measured 2-part polyurethane that expands when mixed. You never touch the chemicals! Just break the seal between the two portions and knead the bag until the expanding foam causes the inner pouch to pop (about 50 seconds) Put the bag in the car and let it expand for another 40-50 seconds Finally, put the driver in the car and let the bag expand to fit the driver 15 to 20 minutes, depending on kit size The insert is ready for use or trimming after 40 minutes of cure time. Seat Conform to FIA Omologation Specification – Fire Proof Tests. FIA – Flame Resistance Test for the Foam Materials EN ISO 15025:2003 – Test No. 11433-04011193 PASS Seat Fabric Covering determination of burning behavior of interior material in accordance with standard UNI ISO 3795:1992 – Test Report No. 391817 Average burning rate 0 mm/min #totimracing #totimracingseatfoam #racing #driver #motorsport #driverseat Email: [email protected] Website: https://www.totimracing.com/ Instagram   / totimracingseatfoam   Facebook   / seatfoamtotimracing