Регулировка кулисы (ЗАЗ, Таврия, Славута)
Adjusting the gearshift lever on a ZAZ, Tavria, or Slavuta is necessary if certain gears are difficult to engage, or don't engage at all. On my Slavuta, first and second gears were difficult to engage. In the previous video, I removed the gearshift lever and repaired it, and now it needs to be adjusted. The gearshift lever is also known as the gearshift control drive. To adjust the gearshift control drive, do the following: Place the vehicle on an inspection pit and lock the wheels with the handbrake; Set the gearshift lever to neutral, on the 3rd-4th gear engagement line (the hole in the end of the lever should align with the hole in the lower gearshift cover). If there is no hole in the cover, drill one with a 5 mm drill; Secure the lever in this position with an M5 screw, pressing the lever down to the required depth if necessary; Loosen the control shaft clamp nut; Set the control shaft linkage to neutral (the distance from the end of the clutch housing to the end of the linkage mounting bolt should be 90 ± 2 millimeters) - this is the reference distance. The gearshift rod extends 75 millimeters from the gearbox housing. Tighten the control shaft clamp nut with a torque of 1.8-2.2 kilograms-force meters; Remove the M5 screw securing the gearshift lever; Check the ease of shifting gears both on the move and at rest. Video Sections: 0:00 Introduction 0:30 Securing the Gearshift Lever 1:28 Loosening the Control Shaft Clamp 1:43 The distance from the edge of the housing to the nut is 9 centimeters ± 2 mm. 2:20 Tightening the control shaft clamp 2:41 Unlocking the gearshift lever 3:01 Checking the gearshift lever operation 4:10 Conclusion In this video, I'll show you how to repair the gearshift lever (ZAZ, Tavria, Slavuta) • Ремонт кулисы (ЗАЗ, Таврия, Славута) Subscribe to our channel and watch videos on this topic #Tavriabackstageadjustment, #backstageadjustment, #zazbackstageadjustment, #Tavria, #zaz, #Slavuta, Follow our social media channels at the following links: Facebook - / 1147375328749226 Instagram - https://www.instagram.com/delo__maste... Telegram - t.me/delo_mastera_boitsa Odnoklassniki - https://ok.ru/delomasteraboitsa VKontakte - https://vk.com/club141674316 Become a channel sponsor and you'll get access to exclusive bonuses. More details: / @delo_mastera_boitsa Thank you all for your support, friends 💕 For channel development: https://www.privat24.ua/send/1mdng

1st and 2nd gears won't engage, gearbox adjustment after replacing the Sens gearshift linkage

Replacing the steering rack (ZAZ, Tavria, Slavuta)

ТАВРОБУДНІ#87 - Регулювання куліси для всіх на Таврії Славуті. Чому відпадає тяга куліси.

Gearshift control repair (ZAZ, Tavria, Slavuta)

Tavria-Slavuta "Setting up the backstage"

Clutch replacement (ZAZ, Tavria, Slavuta)

ТАВРОБУДНИ#28 - Полный ремонт и регулировка кулисы

Do-it-yourself wheel alignment (ZAZ, Tavria, Slavuta)

Slide control adjustment - SENSE, LANOS. Helicopter replacement.

Tractor Rescue: Getting This Muddy Beast Running Like New

Changing the engine oil (ZAZ, Tavria, Slavuta)

ZAZ Slavuta, replacement of the gearshift linkage assembly.

Регулювання куліси,Таврія.

Adjusting the "helicopter" of the ZAZ Chance (Sense) 1.3

ТАВРОБУДНІ#89 - Діагностика і заміна подушок двигуна, нижніх і бокової на Тарвії

Windscreen wiper not working (ZAZ, Tavria, Slavuta)

Replacing the front hub bearing (ZAZ, Tavria, Slavuta)

Таврия доработка кулисы КПП

Caliper repair (ZAZ, Tavria, Slavuta)

