3D Printed Prosthetic Leg V2 — Full Assembly (Junior & Adult Sizes)

A complete, start-to-finish assembly of the Junior and Adult sizes of our open-source, 3D printed adjustable prosthetic leg (V2). No narration — just the full visual build, sped up through the repetitive parts so you can follow every step. The Junior and Adult builds follow the same process shown here. The exact hardware can vary a little depending on the size and configuration you choose, so check the bill of materials for your size in the written guide before you start. Chapters are coming soon. In the meantime, every step is also written out — with the full bill of materials, slicer settings, and printable files — in the build guide: Full build guide (free): https://incept3dlabs.com/projects/pro... Print files on MakerWorld — Junior: https://makerworld.com/en/models/1611... Print files on MakerWorld — Adult: https://makerworld.com/en/models/1611... The Child size, the universal feet, and editable CAD are all linked on the project page above. ABOUT Incept 3D Labs is the open-source arm of Incept 3D. We give open-source hardware projects free 3D printing, engineering, and documentation — then publish everything so anyone can build, improve, and reproduce it. This adjustable prosthetic leg concept is designed to be low-cost and to grow with its user from childhood through adulthood. Design & fabrication: Ethan Shute Assembly optimization & QA: Cory Chung Incept 3D · San Diego, CA DISCLAIMER This prosthetic leg is an experimental concept, shared for educational and developmental purposes only. It is not certified or medically approved, was not designed or evaluated by medical professionals, and meets no medical-device regulations. #3DPrinting #Prosthetics #OpenSource #3DPrinted #AssistiveTech #Prosthetic #DIY #Engineering #MakerWorld