3D Printed Prosthetic Leg V2 — Full Assembly Child Size

A complete, start-to-finish assembly of the Child size of our open-source, 3D printed adjustable prosthetic leg (V2). No narration — just the full visual build, sped up through the repetitive parts so you can follow every step. Chapters are coming soon. In the meantime, every step is also written out — with the full bill of materials, slicer settings, and printable files — in the build guide: Full build guide (free): https://incept3dlabs.com/projects/pro... Print files on MakerWorld (Child): https://makerworld.com/en/models/1594... Junior and Adult sizes, plus the universal feet and editable CAD, are all linked on the project page above. ABOUT Incept 3D Labs is the open-source arm of Incept 3D. We give open-source hardware projects free 3D printing, engineering, and documentation — then publish everything so anyone can build, improve, and reproduce it. This adjustable prosthetic leg concept is designed to be low-cost and to grow with its user from childhood through adulthood. Design & fabrication: Ethan Shute Assembly optimization & QA: Cory Chung Incept 3D · San Diego, CA DISCLAIMER This prosthetic leg is an experimental concept, shared for educational and developmental purposes only. It is not certified or medically approved, was not designed or evaluated by medical professionals, and meets no medical-device regulations. #3DPrinting #Prosthetics #OpenSource #3DPrinted #AssistiveTech #Prosthetic #DIY #Engineering #MakerWorld