Консоль 8-bit на ESP32 своими руками. Проекты Амперки

Hi. I hope you like old 8-bit games. Because today we will build a portable and simple gaming console with an NES emulator on board. The console will be really simple, all you need is an ESP32 controller, a display and a dozen buttons. All components that I used can be found at these links on our website amperka.ru Display https://duino.ru/lcd-display-arduino.... Controller https://amperka.ru/product/esp32-wroo... Battery https://amperka.ru/product/power-bank... Layout https://amperka.ru/product/proto-perf... Buttons https://amperka.ru/product/tactile-bu... Resistors 1kOhm https://amperka.ru/product/resistor Firmware https://github.com/MittisBootloop/esp... Scheme with ready-made firmware https://drive.google.com/drive/folder... We printed a GameBoy style case on a 3D printer. The console itself uses a display with a resolution of 320x240 pixels. But the emulator uses only 252 x 224. Horizontal and vertical stretching allow you to stretch the image to the entire display. With the appearance of brakes, of course. To flash the console, you need the ESPTool program. #8-bit #console #console #dandy #Amperkaprojects #DIY #NES #Amperka