Quansheng, калибровка мощности вручную.

This is my second video about editing the my_calibration.bin calibration file for Quansheng uv-k5, uv-5R+, and other clones of this radio. In the first video, I explained how to edit the correct battery voltage measurement, and in this one, I'll cover calibrating the radio's output power on different bands. Editing is necessary to correctly set the power levels in Low, Midle, and High modes. The problem is that the ratio between these powers is incorrect out of the box, and the ratio between Low and High power is usually no more than two times. Unfortunately, the power calibration procedure requires not only a computer, but also a device to measure it, such as a display meter and a dummy load. It's also a good idea to monitor the radio's current consumption during calibration. In practice, it's recommended to keep the radio's current consumption in Low mode between 0.4-0.6 A, in Midle mode between 1-1.2 A, and in High mode no more than 1.5 A. The programs used in this video can be downloaded from the following links: K5prog_win https://t.me/Avers_UB4C/2 HexCmp https://t.me/Avers_UB4C/3 What does what in the standard calibration file https://t.me/Avers_UB4C/79 The first video on editing the calibration file for correct battery voltage measurement    • Quansheng K5 K5(8) UV-5R+ ЛЮБАЯ прошивка. ...   P.S. I'd like to add that the description here only applies to firmware that uses the standard my_calibration.bin file layout, as in the factory firmware. I'd like to remind you again about the need to save the stock my_calibration.bin file to be able to restore factory settings. The video is a bit long, so I apologize in advance to the viewers.