仮組みで確認しておきたいところ｜造形村 1/48 Fー4E ファントムII

Temporarily assemble the F-4E Phantom II of Zoukei-mura. Except for small parts such as seats and weapons, only large parts such as fuselage and wings are tentatively assembled as a test. The parts that make up the cockpit have a perfect angle and can be firmly fixed. The intake duct is a place where seams are unavoidable. It is difficult to work because you have to process the seams even inside the air duct, but it stands out when viewed from the front, so I definitely want to erase the seams with putty. There were gaps on both sides of the parts on the top of the fuselage, but I feel that they will disappear if the left and right parts of the fuselage are firmly glued together. Adhesion of the so-called outer wing part on the outside of the main wing and the upper part of the vertical tail. There is a parting line here and the adhesive surface has a complex surface structure that needs to be carefully scraped. The angle of finish should also be taken into account. #Plastic model #F-4 #Zoukei-mura