How to Repair a Stuck Vent HVAC Actuator on a Honda Pilot

How to repair a stuck vent actuator on a second-generation Honda Pilot. This is a 2011 model. A sticking actuator will prevent you from selecting which vents the air comes from. So for example it may be stuck on the defrost, on your feet, or through the middle dash vents. In the worst case scenario, you may be stuck with replacing the actuator. However this method may work for you and it’ll end up saving you money and time on the replacement. #teslong #hondapilot #honda Website: http://4diyers.com Patreon:   / 4diyers   Facebook:   / 4diyers   Twitter:   / 4diyers   Instagram:   / 4diyers   Tumblr:   / 4diyers   Pintrest:   / 4diyers   Tools/Supplies Needed: -borescope -silicone plastic safe lubricant -standard screwdriver Procedure: First is dropping down the glove box. Simply squish in the sides and then pull it straight down. You may be able to fit a standard screwdriver in there and then work the linkage back and forth while operating the control panel for the HVAC settings with the ignition on. When the ignition is on, this will power up the system so it’s operational. If you find it still having problems, then applying a lubricant spray would be the next option. I used a food-safe silicone spray, which is safe for plastics. You’ll want a spray that is safe for plastic so it doesn’t cause any future problems. Then continue to operate the actuator linkage, eventually that lubricant will work its way in and then it’ll start functioning as it should. I did this repair about eight months ago and haven’t had an issue since. Once done, clip the glove box back into place and you’re officially done.  Thank you to all those who watch my videos and support my content. Don't forget to subscribe to my channel for future tutorial videos and like my video if you found it helpful. New videos are always being uploaded every week! © 4DIYers 2013 All Rights Reserved No part of this video or any of its contents may be reproduced, copied, modified or adapted, without the prior written consent of the author.