LGEN2 Installation for Boat2Trailer Ramp N Clamp

This is the Long FULL installation breakdown video of the LGEN2 Model Ramp N Clamp on Boat2Trailer. This installation video shows every step of the installation process. This video will break down the long handle and short handle Installations. If you have an adjustable winch stand you may move the winch forward and install the clamp. If you have a welded winch stand, you will need to remove your boat from the trailer so you may access the current roller or bow stop. Next you will need to remove the bow stop or roller from your trailer. Install the boat latch in the mounting bracket the roller was in. Find the right angle or pitch to match the pitch of your boat. Tighten the bolt snug, roughly 18 - 20ft lbs so the latch can still pivot. Now pull the boat into the latch mechanism until you here the click. Once it has clicked into place you can install the handle. With the long handle, make sure you place the handle in a low enough position so that it does not come into contact with the boat when you pull the lever. Now you are ready for use. Intro - 0:00 What parts are included in the box - 0:14 Bow Drop Roller Installation - 0:34 Winch Stand Adjustments - 0:55 Remove Boat Roller - 1:16 Install Boat Latch - 1:21 Snug Up Latch - 1:47 Winch Stand Adjustments Tighten - 1:55 Correct Pitch and clamp height - 2:08 Automatic handle release - 2:23 Manual handle release - 2:34 Manual handle Install - 2:49 Long handle Install - 3:21 Find more info on Website: https://www.boat2trailerhookup.com/ Facebook:   / boat2trailer   Twitter:   / boat2trailer   Instagram:   / boat2trailer