Budowa drona FPV od A do Z (2025) | #2: Lutowanie silników i zasilania

Hi! 👋 Welcome to the second episode of the "Building an FPV Drone from A to Z (2025)" series, where I'll show you step-by-step how to build a modern FPV racing drone yourself. 🎥🚁 In this episode, we'll tin the pads, prepare the wires, and solder them to the AIO. Finally, we'll check the solder joints with a multimeter and use a smoke stopper when connecting the power for the first time. This series is a great resource for both those just starting out in FPV and those looking to build a new setup in 2025. 🔧⚡ --- 📦 Component List: 🔹 Frame: TBS Source Podracer 4 🔹 FC + ESC: Speedybee AIO F405 40A 🔹 Motors: T-Motor Pacer 1804 2400KV 🔹 Propellers: Gemfan Hurricane 4023-3 🔹 VTX: Walksnail Avatar Nano V3 🔹 Receiver: ELRS Radiomaster XR1 + 2.4GHz Antenna 🔹 Buzzer: iFlight YR50B_s Finder 🔹 Canopy: Custom, designed by PoD 😁 🚨 The canopy model is available for everyone to download on my Patreon 👌 🔹 Link:   / model-3d-kanopki-135726237   💰 Estimated construction cost: approx. 1500–1700 PLN gross --- 🛠️ Tools I use 🔹A set of Allen and Torx bits with a Wolfcraft screwdriver 🔹Graphite screwdriver 🔹Tweezers 🔹Pliers and pliers 🔹Precision knife with replaceable blades 🔹HGLRC RC2 soldering iron + TS-B2, TS-D24, TS-BC2, TS-I tips 🔹Cynel SN60PB40 SW26/2.5% solder - 0.5mm, 1mm, and 2mm 🔹Copper braid 🔹Flux Kester 186 🔹Six-point "third hand" 🔹Tip cleaner 🔹Graphite lighter or heat gun 🔹Insulating tape and double-sided sponge tape 🔹Black cable ties 🔹Heat shrink tubing set 🔹Multimeter and smoke stopper 🔹Vernier caliper 🔹M2, M2.5, and M3 socket head screws and nuts set 🔹USB data cable --- 📺 Chapters 00:00 – Introduction 01:21 – Replacing AIO screws 04:01 – Tinning the pads 10:54 – Preparing the wires 17:03 – Soldering the power supply 24:03 – Soldering the motors 26:25 – Multimeter test 27:52 – Smoke test Stopwatch 29:59 – Connecting to Betaflight 30:38 – Summary and Conclusion ❓ Have any questions? Leave a comment – ​​I'd be happy to help! Don't forget to leave a 👍 and subscribe 🔔 so you don't miss the next episodes of the "Building an FPV Drone from A to Z" series. --- 🫰💵 Coupon code for the MEPSKING promo: Prosto 💡 It couldn't be simpler 😉 👉 https://shorturl.at/LTudo 💖 Support the channel's development: 🔹 YouTube – Join the community: 👉    / @prosto_o_dronach   🔹 Patreon – Support and additional materials: 👉   / prostoodronach   Thanks for watching and happy flying! 🛸 --- #FPV #drones #dronebuilding #dronebuild #ProstoODronach #fpvbuild #walksnail #dronFPV #drone #speedybee #t-motor