3D Scan to CAD in Fusion 360: Car Lamp Cap

Fusion 360 reverse engineering can turn even a rough 3D scan into a clean, usable CAD model. In this video, I redesign a car lamp washer cap from a shiny STL scan that was difficult to capture smoothly. The original file, abc.stl, was a car lamp washer cap with poor scan quality because of the reflective surface. Instead of only smoothing the mesh, I rebuilt the part in Fusion 360 using two different methods: a normal solid modeling workflow and a surface modeling workflow near the end. You will see how I align the scan, capture the main scan geometry, create reference sketches, use lofting, add fillets, extrude cuts, create surface sweeps, and patch surfaces to get a cleaner final CAD model. This tutorial is useful for Fusion 360 learners, mechanical designers, product designers, automotive CAD beginners, and anyone interested in reverse engineering car parts from 3D scans. The main goal is to show how to think through a damaged or imperfect scan and rebuild it into a cleaner, editable model. If this helped you, like the video, subscribe for more Fusion 360 reverse engineering tutorials, and comment which method you prefer: solid tools or surface tools. Disclaimer: This video is for CAD learning and reverse-engineering practice, not certified automotive replacement-part manufacturing. Fusion 360, Fusion 360 tutorial, Fusion 360 reverse engineering, car lamp washer cap, car lamp washer cap CAD, 3D scan to CAD, STL to CAD Fusion 360, reverse engineering CAD, reverse engineering car part, automotive CAD design, car part CAD modeling, Fusion 360 surface modeling, Fusion 360 solid modeling, surface tools Fusion 360, solid tools Fusion 360, bad 3D scan fix, shiny part 3D scan, scan geometry Fusion 360, loft Fusion 360, patch surface Fusion 360, surface sweep Fusion 360, mechanical design tutorial, product design CAD, car part redesign, CAD modeling tutorial #Fusion360 #ReverseEngineering #3DScanToCAD #CADModeling #SurfaceModeling