TOYOTA / LEXUS Fuel Pump Test & Replacement Procedure

MY STORE: https://forward-momentum.printify.me/ PLEASE READ: Pay very careful attention to the order of small parts when you remove the old fuel pump (assuming it's correct and OEM). You need to make sure you put everything back together in the same order, especially at the fuel pump outlet. At the outlet, which plugs into the filter housing, you need to slide on the new black plastic adapter, o-ring, then the white top fitting. Then install the pump. This was not clear in the video. If you do not do this, the car will have "long starts" and you have to crank it a lot to get it going. **My Video Editing Software messed up the aspect ratio. I apologize for the inconvenience. The vid is still HD, but "cropped" to 16:9, which gives it a "widescreen" appearance. I'll fix it on the next video, unless everyone likes it for some reason :-) ** LEXUS GS400 shown, but the same pump and procedure covers many other vehicles, such as the GS300, GS430, LS430, LX460, Tundra, Sequoia, IS300, etc. Double check your vehicle before following this. SAFETY You will be working around gasoline and its vapor! Please use extreme caution and eliminate any potential sources of spark, flame, etc. around your work. Also, be sure to protect your hands, eyes and upholstery from the liquid. PARTS Denso Fuel Pump Kit | P/N 950-0107 TOYOTA Fuel Filter | P/N 23300-74330 TOYOTA In-Tank Plate Gasket | P/N 77169-33020 OPTIONAL PARTS (not changed in video, but recommended by FSM) Fuel Filter to Top Assy. o-ring Fuel Pressure Regulator o-ring TOOLS Common tools such as ratchet, sockets, screwdrivers Multimeter MUSIC –––––––––––––––––––––––––––––– Winding Road by Pyrosion   / pyrosion   Creative Commons — Attribution 3.0 Unported — CC BY 3.0 Free Download / Stream: https://bit.ly/al-winding-road Music promoted by Audio Library    • Winding Road – Pyrosion (No Copyright Music)   ––––––––––––––––––––––––––––––