How to Coil Split Humbuckers

In this video we demonstrate how to coil split a Seymour Duncan humbucker and show how it gets wired up to the volume control in a guitar circuit. Coil splitting is a simple and popular mod to do yourself using 4 conductor wire pickups. It sends the signal path of one coil to ground leaving just the other coil in operation. The video features a simple circuit consisting of a volume push pull (used to split the coils), a jack socket and a Seymour Duncan humbucker. After the pickup is added to the circuit, it gets plugged into an amp and tested. Coil splitting is a simple mod which essentially grounds or shuts off one coil (half) of the pickup. This results in a single coil operating. Pay attention however! The majority of 4 conductor pickup manufacturers use the same four colours (black, white, red and green) but they are rarely in the same order. For example, the hot signal wire on a Seymour Duncan humbucker is typically black, on a Gibson humbucker it is typically red and on a Fender humbucker it is typically green! Confused yet? The wiring diagram for this video as well as a useful pickup colour code chart is available on our website: https://sixstringsupplies.co.uk/pages... Les Paul Coil Split Wiring Kit: https://sixstringsupplies.co.uk/produ... Prewired harness: https://sixstringsupplies.co.uk/produ... Guitar & Bass Wiring Tutorials:    • Guitar & Bass Wiring Tutorials   Mini Wiring Tutorials:    • Mini Wiring Tutorials   All wiring tutorials available in photo format on our website: https://sixstringsupplies.co.uk/pages...