Ultra Rare Bronze Heads & Hi Rise Intake Make The Ultimate Flathead Engine

This summer Matt started working on an engine for the 1932 Ford Roadster, that turned into a lot more then just a re-gasket. The engine will need to be set away to have the bearings for the crank replaced and the whole bottom end gone over for any other issues. Luckily Matt is a hoarder and had another flathead sitting that could be used. Ironically this engine was used as mock up in the car back when the car got worked on. The "new" flathead came from an estate in Wilmington, NC, where the story was told that this engine was used as a cackle engine at local hot rod shows. Matt and Steve first test the engine on the run stand to see if there are any issues, and then install the copper heads and intake. Matt also did a bench line on the time it took the engine to get up to temp versus the copper heads. Can't wait to hear this engine in the 32 Roadster!! Black Friday Code - BF2022 Get Your Iron Trap Merch Here - https://irontrapgarage.bigcartel.com Wanna send us something? Iron Trap Garage PO Box 6 New Berlinville, PA 19545 Amazon Wishlist - https://www.amazon.com/hz/wishlist/ls... Matt's Instagram - @irontrap -   / irontrap   Mike's Instagram - @mhammsteak -   / mhammsteak   Iron Trap Parts Instagram - @irontrapfinds -   / irontrapfinds   Iron Trap eBay - https://www.ebay.com/usr/irontrapgarage/ Email us - [email protected]