electrolux EWX14450W - full spin only 1400rpm (motor view - no belt/pump)

here is a full spin cycle on the electrolux time manager, with the belt removed and the pump disconnected. the motor shown is a nidec 20584.603 AC brushed motor. this is almost the exact same motor used in my ZWF1621W, but this is the later "nidec" branded version of it. meaning that in the "cotton normal 90°" video, my statement of it being capable of 1600rpm was actually 100% correct since it is the same ratio as aquacycle too. but the machine is far too unstable to actually be a 1600 spin. i like that this motor has a lot of inertia, although i am not a huge fan of the motor itself or nidec as a whole. the drum:motor ratio of theis machine is 1:10½. at full speed, the drum reaches 1388rpm and the motor reaches 14,574rpm (approximate figures). 00:00 - start and initial "drain" 00:24 - begin distribution 00:57 - burst #1 to 450rpm/4725rpm 01:40 - begin main burst 01:50 - 450rpm/4725rpm 02:26 - 650rpm/6825rpm 02:47 - 850rpm/8925rpm 02:56 - 1000rpm/10,500rpm 04:36 - 1150rpm/12,075rpm 05:58 - 1388rpm/14,574rpm 07:57 - deceleration and end