indesit IWDD7143 - full spin only 1400rpm (motor view - no belt/pump)

here is a full spin cycle on the indesit washer dryer, with the belt removed and the pump (not) disconnected. once again, the pump was drained fully and left connected. hotpoint/indesit machines are too sensitive to missing components and will error out if anything is unplugged, even if it's not required at that time... the motor shown is a ceset MCA 61/64-148/AD16 AC brushed motor. quite a unique motor and definitely not commonly used on indesit machines, especially not 1400 models - their ratio is usually 1:12 and not 1:10¾. it does sound nice though, but somewhat lacks the sound of power at full speed due to the lower ratio. the drum:motor ratio of this machine is 1:10¾. at full speed, the drum reaches 1365rpm and the motor reaches 14,674rpm (approximate figures). 00:00 - start and begin distribution 00:33 - burst #1 to 300rpm/3325rpm 01:39 - burst #2 to 300rpm/3325rpm 02:31 - begin main burst 02:36 - 300rpm/3325rpm 03:44 - 1000rpm/10,750rpm 04:33 - 1200rpm/12,900rpm 05:38 - 1365rpm/14,674rpm 06:10 - deceleration 06:51 - anti-crease 08:21 - final drain and end