Lathe rebuild Pt.1 - The bed, the saddle and the headstock

Hi everyone. In this video we'll go through part of the process of my lathe rebuild. There might be a few things missing (like 'levelling' the bed before anything else), it was too much footage to squeeze in a short video. Anyway, I hope this helps someone out there; at least you can look at some parts of the lathe that you couldn't otherwise without taking it apart. Tools I use: https://www.nbrworks.com/tools/ Timestamps 00:00 The bed 02:43 The saddle 05:18 The headstock 06:30 New spindle bearings 08:33 Spindle runout 09:35 Electrics 10:03 Putting it back together 11:05 Running Note: I'm not a professional and this is not a tutorial. This is just a careful reassembly with some improvements and compromises in order to have a working lathe in a short term. Be mindful of warranty loss if you choose to do this on a new machine. Lathe: HBM 250x550 Profi Vario Lathe rebuild playlist:    • HBM 250x550 lathe rebuild   #lathe #diy #machining Credits: Scraping clip at 04:21 is from Abom79/Lance Baltzley's video:    • Scraping Basics with Lance Baltzley   Music: Quincas Moreira | Bunny Hop    • Lathe rebuild Pt.1 - The bed, the saddle a...