TerraFOAMing Pink Mountains (Update #141- Maroon Creek 25)

The Journey up to Hell Gate begins with some scene composition and foam carving. The OC&RG is a freelance HOn3 model railroad (1:87 scale, 3-foot narrow gauge) inspired by the Colorado Midland and other early Colorado railroads. This is a “progress under construction” channel, not a “how-to” channel. Thank you for your interest and support! Layout details Scale: HOn3 (1:87 scale, 3-foot narrow gauge), with some standard HO dual-gauge track. Design: Single-deck, point-to-point layout with reverse loops, built around the walls with one peninsula, and what I call a “nolix.” Design inspiration: John Allen, Harry Brunk, and Malcolm Furlow. Location: Inspired by the Colorado Midland between Leadville, CO, and Basalt, CO—about 61 miles over the Continental Divide. Multiple Colorado narrow-gauge railroads provide inspiration. Era: Late 1930s to early 1940s, late spring to early summer. No hard date has been decided. Style: Prototype-inspired. Consider the OC&RG a “what if” railroad based on a different set of conditions and variables regarding the Colorado Midland. Size: Roughly 26' x 28". Construction: Mostly L-girder with Masonite spline between locations. Materials: 3/4" plywood benchwork ripped into 1x4s, with a 1/2" plywood base for locations. The spline consists of five pieces of 1/4" Masonite ripped to a width of 1 3/4", laminated together. This creates natural easements and flowing curves. Track: Micro Engineering Code 70 mainline, with some Code 55 for spurs. Minimum mainline radius: I did my best to keep this at 20". There are a couple of spots with 18" radii, kept as short as possible. Lighting: Not there yet. I’m still not sure. Operating system: DCC Digitrax for the trains, LCC for the layout. You can support me at: Buy Me a Coffee Facebook profile The song “Dirty Shame” was written by artist Scott Nance. The song was recorded and engineered by me at Otter Creek Studios. Scott is on vocals and dobro. The other instruments are me attempting to be a musician. The song “Dancin’ With the Devil” was written by artist Daniel Jordan. He cut a demo of the song with me, and later produced “Dancin’” in a professional studio. The version you hear on my channel features Dan on vocals and acoustic guitar. The other instruments are all me, along with my production of the song. Dan’s professional version can be found on Daniel Jordan - Topic. The album is called Introduction, and “Dancin’” is track 6, I think.