Caltrain JPBX 309 North | S, Sunnyvale Ave. Railroad Crossing, Sunnyvale CA

May 19, 2026 After filming VTA light rail, I had enough time to get a couple of Caltrain's in Sunnyvale and I set up here minutes before this train came. Due to that, I setup and clipped out a pedestrian gate on the close right side because this angle barely can fit it in. You can still see it in parts of the video. I originally didn't come this way for VTA light rail trains, I originally came for the Santa Cruz Beach Train but was misled on when the daily run weekday run season starts and I was two weeks early so I did come back 2 weeks later to film the beach train. Caltrain commuter rail train northbound on the JPBX Peninsula Sub passes through the South Sunnyvale Avenue railroad crossing in Sunnyvale, California. Caltrain JPBX 309 JPBX 310 Crossing Info City: Sunnyvale, California Crossing Signal/Line Owner: Caltrain JPBX Crossing User(s): Caltrain, UPRR Locals Bell Sequence: Ring till gate start to rise. Right Pedestrian Gate Gate Lights: NEG Clear LEDs "Alstom-Aurora Look" Mechanism/Counterweight Arms: WCH Base: WCH Install: Caltrain Early 2010s, Installed 2011 Right Shoulder Signal Bell: WCH E-Bell Lights: 2 pairs of 12x24 inch WCH 2nd Gen Miller Felpax LEDs/WCH Lights Junction Box: WCH Gate Lights: NEG Gate LEDs Mechanism/Counterweight Arms: WCH Base: WRRS Install: SP 1980s Median Gate-Less Signal Lights: 3 pairs of 12x24 inch WCH 2nd Gen Miller Felpax LEDs/WCH Lights Junction Boxes: WCH Base: WCH Install: Caltrain JPBX early 2010s, Installed 2011 Left Pedestrian Signal Bell: WCH E-Bell Lights: 2 pairs of 12x24 inch WCH 2nd Gen Miller Felpax LEDs/WCH Lights Junction Boxes: WCH Gate Lights: RECO or NEG Gate LEDs Mechanism/Counterweight Arms: WCH Base: WCH Install: Caltrain JPBX early 2010s, Installed 2011 Left Pedestrian Gate Gate Light: RECO or NEG Gate LED Mechanism/Counterweight Arm: WCH Base: WCH Install: Caltrain JPBX early 2010s, Installed 2011 Left Shoulder Signal Bell: WCH E-Bell Lights: LEDs/WCH Lights Junction Boxes: WCH Gate Lights: RECO or NEG Gate LEDs Mechanism/Counterweight Arms: WCH Base: WCH Install: Caltrain JPBX early 2010s, Installed 2011 Right Pedestrian Signal Bell: WCH E-Bell Lights: 2 pairs of 12x24 inch WCH 2nd Gen Miller Felpax LEDs/WCH Lights Junction Boxes: WCH Gate Lights: RECO or NEG Gate LEDs Mechanism/Counterweight Arms: WCH Base: WCH Install: Caltrain JPBX early 2010s, Installed 2011 This crossing owned by Caltrain is overwhelmingly a Caltrain Early 2010s signal install with gate and gate light changes while the closer shoulder signal on the right is an SP 1970s/1980s signal install remaining with its bell, lights, light heads, gates, gate lights, mechanism, and counterweight arms changed pretty much almost everything. Camera Sony FX30 Cinema Line + Tamron 17mm - 300mm