ninja1000 / Z1000 fender eliminator Install and brake flasher upgrade

Welcome Summer! Finally had the time to install this fender eliminator kit from CREESE1 on Ebay. The install went well, only having some issues as I was doing this without another video to guide me. Some recommendations: I went so far as to solder the connections and use shrink wrap. You can use crimp connectors and electrical tape if you prefer. In the end I was able to use the existing 6mm bolts to hold up the bottom of the bracket. It only held about 3 threads so I used thread locker (blue) to make sure it stayed. You should disconnect the battery before starting. I usually don't but I'm an idiot. Comment and Like! As always, follow at your own risk. I'm not a licensed mechanic. The power port and garage door opener video is here:    • Ninja 1000 / Z1000 Accessory Power Point a...   Build your own brake flasher! (Or buy one from ebay for $4.00)    • 4060 Timer Brake Light Flasher