SuperV4 is a voltage supervisor board for the Heltec V4 running meshtastic
I've made these available at https://www.r48d.com/ I've created a voltage supervisor circuit to prevent the low voltage boot loop issue that plagues the Heltec Lora32 V4.
▶︎
Android 17 sucks. So I put Linux on a phone.
▶︎
900 MHz Mesh Nearly Broke Me… Here’s What I Finally Discovered
▶︎
Shielding to Prevent Magnetic Radiation | How Cable Shields Really Work?
▶︎
The Heltec v4 doesn't work as a Meshtastic Solar Node
▶︎
Is This DIY EMP Device Actually Dangerous?
▶︎
Upgrade your Rak MeshCore/Meshtastic repeater to 1 Watt for $15!
▶︎
Meshtastic Heltec V4 Full Review: Setup, Range & Sensors
▶︎
Off-Grid kommunizieren: Das geheime Netzwerk ohne Internet & 5G | ARTE Tracks
▶︎
RoverBot Build Log #1 — First Bench Bring-Up: UDP-Controlled Motor + Servo Actuation
▶︎
This Cheap LoRa Board Outperforms $200 APRS Radios | Real Test
▶︎
Heltec V4 Solar Setup: 18650 Battery Bank, and Solar Wiring!
▶︎
I Wish I Knew This Before Building My Home Lab
▶︎
Why the US Navy's "Dead" Railgun Just Fired Again
▶︎
Connect Meshtastic to Home Assistant: Complete Guide! 📡
▶︎
Heltec WiFi LoRa 32 V4
▶︎
Unbelievable Workers | Working with Talented Engineers #46 #fail #adamrose #smartworkers
▶︎
This Solar Panel with Battery for Meshtastic Heltec v4 is a bad choice
▶︎
This UNBELIEVABLE Plane Consumes LESS FUEL THAN A CAR!
▶︎
How to build a 1W Meshtastic/Meshcore Solar Node - DIY
▶︎