Triumph Bobber | Coolant Change

Disclaimer: I am not a mechanic. I do this purely for fun and I hope that the content I produce will somehow help some other like-minded individuals who also want to service and maintain their own Triumph Bobber. CORRECTION: I made a mistake on the video telling you to use a 10mm socket for the skid plate and bracket for the fuel tank. The correct size is a 12mm Socket. My BAD. Sorry lol It’s time for a COOLANT CHANGE on my 2018 Triumph Bobber Black. Living in the tropics, probably the single most important thing is to make sure your bike has the right coolant. It was a pretty easy exercise. To me, it was probably easier than changing the oil, but it was a bit fiddly because you had to slight remove the tank to access the radiator cap which was located underneath the fuel tank. PRIMARY MAINTENANCE TOOLS & COOLANT Coolant Reservoir - 8mm Socket / Torque Spec 9Nm Skid Plate - 12mm Socket / Torque Spec 23Nm Rear Bracket on Fuel Tank - 12mm Socket / Torque Spec 30Nm Coolant OAT2053 equivalent - Motul Auto Cool Optimal 1.5 Liters Flat Head Screwdriver Standard Pliers Funnel If you enjoyed this type of content please leave me a like and a comment. Would be great to hear from you. Would be extremely grateful if I could get a SUBSCRIBE too as I’m slowly trying to build up the channel. Thanks in advance. Song: Embrace Composer: Sappheiros Website: https://open.spotify.com/artist/5ZVHX... License: Creative Commons (BY 3.0) https://creativecommons.org/licenses/... Music powered by BreakingCopyright: https://breakingcopyright.com