🔥 MaxiClimber Classic Roller Replacement: The Good, Bad, and Stuck 🔥

🔥 This is my MaxiClimber Classic Roller Replacement video and I'm going on my third year of MaxiClimber and still loving it. 🔥 A video with a few callouts and everything you could possibly ever want to know about the MaxiClimber Classic Rollers and their replacement. Yes I say wheels all the way through this video instead of rollers. It was a long day. Also below are written instructions on some tips on replacing rollers or wheels as I said that day. ;) PLEASE NOTE: Your MaxiClimber: Comes with one year Warranty: be sure to register your Maxiclimber After one year you can purchase 3 yr extended warranty: Also have been told can keep purchasing extended warranty with no limits to keep your machine covered for normal wear and tear: email: [email protected] • Work (888) 433-9083 Equipment used in this video: ==================================== Camera Equipment: Canon M-50 Camera kit with 15-45 zoom lens https://smile.amazon.com/Canon-Mirror... Vivitar 911 Tripod old aluminum 1980s Edit software: VideoPad NCH Software https://www.nchsoftware.com/videopad/... Actual Equipment to replace rollers/wheels: (both not available at this time, so I put links to next closest I could find, and left in original links who knows maybe when you check they will be available. 13mm Socket (used in Video) https://smile.amazon.com/gp/product/B... Alternative: https://smile.amazon.com/CRAFTSMAN-So... 3/8" Ratchet used in video https://smile.amazon.com/gp/product/B... Alternative: https://smile.amazon.com/Titan-Tools-... Vinyl runner: Mine is 27" x 66" and bought from Home Depot by the foot. Here is link to something similar although best to just go to Home Depot to get one. https://www.homedepot.com/p/Ottomanso... ==================================== If anything else please read about wheels below. I say the same in the video, but here are the written directions. How to change rollers on MaxiClimber Classic pedals. Bolt location on pedals ============================== Diagram Bolt on Pedals x's represent bolts not holding rollers and should be left alone. MaxiClimber x x x || || x x x B C || || C B A | | A ============================== *Tools: 13mm Socket and ratchet *Do Rollers one side at a time. *New rollers stay in box until used. Remove lock nuts on bolts A,B,C on one side. Next remove bolts from same. Remove rollerchange rollers on MaxiClimber Classic s A or C then other. And then B. Really doesn't mater much. Big thing is to pay attention not to twist, but pull roller straight down when removing. (Note: If you want you can remove bolt and roller at same time, but I have found this way to be fastest and most efficient) Order counts installing new rollers refer to pedal you didn't work on should you have any wonder bolt, roller, or lock nut placement for installation. Bolt and roller in position B are installed first. Do not put on nut until all three rollers are in place. Next is bolt and roller in position A. Since next step involves a little bit of jiggling you can hand thread nuts on bolts but don't tighten. Lastly install bolt and roller position C in place. Finger tighten lock nut on bolt C. Now tighten all lock nuts on new rollers use the other pedal as reference as to how far to put lock nut on. Overtightening can damage roller. Now repeat process on other pedal with remaining new rollers. (save your rollers as odds are the bearings may come in use for another project. Roller Rotation: Also if you want when you first spot roller damage you can rotate your rollers from position B to C, C to A, and A to B to increase life of your rollers until your replacements arrive.)