This ONE BambuStudio Setting Saved My 10-Hour Failed Print! MUST-WATCH For New Bambu A1 0.2mm Users!

After 10 hours of frustration, failed prints, and endless Googling... I finally found one single setting in BambuStudio that changed EVERYTHING. 😤➡️😮 If you're using a Bambu Lab A1 with a 0.2mm nozzle, you need to check this Machine G-code setting in BambuStudio before your next print. Trust me—it can save you hours of time, wasted filament, and your sanity. It all came down to the Z-axis offset with the nozzle being too low and touching the print, causing the filament to clog and/or just not properly extrude from the hotend. Regardless, this simple, single fix saved my entire weekend. Hope it helps you as well! DEFAULT SETTING: ;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing == ;curr_bed_type={curr_bed_type} {if curr_bed_type=="Textured PEI Plate"} G29.1 Z{-0.02} ; for Textured PEI Plate {endif} NEW SETTING THAT SAVED MY PRINT: ;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing == ;curr_bed_type={curr_bed_type} {if curr_bed_type=="Textured PEI Plate"} G29.1 Z{0.06} ; for Textured PEI Plate {endif} Link to test print STL on Makerworld: https://makerworld.com/models/395014 Business inquiries/collaborations: [email protected]