Takagi Marco 1201 Combo Install: Pole, S/L Arm, Phoropter Arm, OH Lamp

Attach the OH Lamp extension cable to the lower connection and push the excess down into the lower support pipe while holding on to the top of the cable that is pushed through the pole. Lock your pole in position before installing the trim ring. Adjust the S/L arm in the position that it won't interfere with the console while swinging into position. Adjust the P arm to about a thumbs up position from the top of the pole. There is no travel restriction screw to keep the O/H lamp from rotating all the way around so advise the Dr/clinician to be aware of this. Note Make sure the support pipe under the console is released all the way to the floor for support!