Tavor X95 Type B Bolt & Trigger Full Monty disassembly Part 2. IWI IDF Bullpup

I won't lie, the assembly and disassembly of the "Type B" bolt assembly is very cumbersome so I don't know why it was not in the manual. They need to get rid of the bolt control bar/rod and redesign a firing pin, also replace the extractor plastic spring because I'm leery the organic material in place of a metal extractor spring will fail. Addition: I now know why the disassembly of the X95 18.5" bolt was so cumbersome. It began when soldiers were damaging the recoil buffer so they added a triangular piece above the buffer to prevent the buffer from rising just before the buttplate closes. Unfortunately, that triangular piece made the recoil non removeable which in turn prevented the rod from sliding out easily, making the whole disassembly of the bolt very complicated. See Micro Full Monty near the end of the Video. X95 18.5" full disassembly.    • Tavor X95 Full Monty disassembly & field s...   X95 18.5" vs. Tar21.    • X95 vs Tar-21. Review. IWI Tavor bullpups.   X95 Micro Surplus review.    • X95 Micro Surplus MSW. Review. IWI Tavor I...   X95 Micro Full Monty.    • Tavor X95 Micro Surplus MSW. Full Monty di...   Disclaimer: this video is for educational purposes only, free of charge. Any part you copied is at your own risk and should be inspected by a professional prior to use. Due to Youtube's policy. Please do NOT ask for link or post information of where to buy. Please do not attempt to do my disassembly because it's not made for novices who can't figure out what I'm doing on or off camera also quite often due to the length I don't reassemble or include the FCG which is done separately. If you like what I do on Youtube and you found some parts useful then please support my channel by pressing the LIKE and the subscribing buttons. If it was of no use to you then thanks for watching and please press next. Making videos are time consuming and not to mention expensive to do... Thank you.