Ironman 4x4 Raid Rear Bumper Suited For 6th Gen 2021+ Ford Bronco | Install Guide

Join us on this magical journey of excitement as we show you step-by-step how to install the Ironman 4x4 Raid Rear Bumper on your 6th-Gen 2021+ Ford Bronco. Get your Ironman 4x4 Raid Rear Bumper for your 6th-Gen Ford Bronco here: http://ironman4x4america.com/raid-rea... Chapter Selection: 0:00 Intro 0:27 Remove spare tire 0:39 Unplug rear bumper wire harness 1:20 Remove factory rear bumper 2:16 Remove parking sensor harness from factory bumper 3:03 Mark sensors with a paint pen to indicate passenger or driver side 3:30 Remove parking sensors 5:18 Remove license plate light from factory bumper 5:43 Install Ironman 4x4 light pods into Raid bumper 5:54 Install parking sensors to Raid bumper 8:36 Explanation for wire harness extensions 8:54 Cable management 9:06 Plug rear license plate light harness into original factory harness 9:51 Install gravel guard plates for Ironman 4x4 light pods and parking sensors 11:01 Place chassis reinforcement brackets in frame 11:45 Install Raid bumper shell and recovery points 13:48 Route your license plate light relocate wire harness 17:51 Remove inner panels from rear door 18:34 Zip tie license plate light wire harness to follow factory rear camera harness 19:15 Feed license plate wire harness through rubber grommet pass through 21:54 Re-install spare tire with lug extensions 22:50 Feed wire harness through spare tire to connect to license plate light and relocate bracket 23:33 Install license plate relocate bracket to spare tire lug extensions 24:05 Insert spring clips into license plate relocate bracket and install license plate 24:24 Re-install inner panels on the rear door 24:43 Reconnect bumper wire harness 25:04 Conclusion For additional installation support or if you have any questions please reach out to our customer service team. https://ironman4x4america.com/​