Ironman 4x4 Raid Front Bumper Suited For 6th Gen 2021+ Ford Bronco | Install Guide

Join us on this magical journey of excitement as we show you step-by-step how to install the Ironman 4x4 Raid Front Bumper on your 6th-Gen 2021+ Ford Bronco. Get your Ironman 4x4 Raid Front Bumper for your 6th-Gen Ford Bronco here: https://ironman4x4america.com/raid-fr... Chapter Selection: 0:00 Intro 0:18 Unpack your bumper and layout your parts 0:34 A note about adaptive cruise control 1:11 Remove front skidplate 1:33 Remove factory front bumper 3:28 Remove intercooler shroud and adaptive cruise sensor 4:40 Remove active aero louvers and remove wire harness from that assembly 7:46 Cut a gap in the radiator shroud for the wire harness to pass through and re-install active aero louver assembly 8:41 Set up the adaptive cruise sensor relocation bracket 13:48 Remove radiator top shroud 14:18 Unplug front camera and sprayer if equipped 14:54 Remove front grill 15:33 Remove radiator grill cover, fenders, lower front trim, and headlights 18:25 Remove top 2 louvers from grill cover and trim area for adaptive cruise sensor relocation 21:06 Enlarge hole on top core support for relocation bracket hardware 21:32 Re-install modified radiator grill cover 22:29 Re-locate hood release cable retainer clip 23:33 Install adaptive cruise sensor relocation bracket 24:57 Re-install headlights, lower trim, and fenders 26:17 Adaptive cruise sensor adjustment 26:53 Remove front camera and harness from front grill 27:44 Remove front parking sensors and harness from front bumper 29:09 Install parking sensors and harness into Ironman 4x4 Raid front bumper 31:02 Install LED fog lights and protective gravel guard plate 31:33 Assemble front camera relocation bracket 32:40 Install LED light bar 33:26 Install camera extension cable and sprayer hose 35:02 Install hoop to bumper shell 36:03 Install front plate bracket and winch fairlead 36:38 Remove factory nut plates from front frame horns 37:08 Install winch tray support brackets and recovery points 39:43 Install winch tray and winch 41:52 Install winch control box relocation bracket 43:39 Hang grill back on but leave loose 44:09 Install front bumper shell 45:26 Feed camera cable and sprayer hose back up and reconnect 46:35 Tighten grill hardware and reinstall the radiator top shroud 47:50 Reconnect bumper wire harness and set bumper position with pinning bolts 48:48 Re-install front skidplate 49:15 Conclusion For additional installation support or if you have any questions please reach out to our customer service team. https://ironman4x4america.com/​