How to Change Engine Oil for a Ford Fusion (2013-2020) L4 - 2.0

We are going over the steps to change out the engine oil a 2013 Ford Fusion (L4 – 2.0L). Resetting the Oil Life Monitoring System (2nd Method) 1. Turn the ignition key to the on position. Do not start the engine. For vehicles with push-button start, press and hold the start button for two seconds without pressing the brake pedal. Do not attempt to start the engine. 2. Press both the accelerator and brake pedals at the same time. 3. Keep both pedals fully pressed. 4. After three seconds, the Service: Oil reset in prog. message will be displayed. 5. After 25 seconds, the Service: Oil reset complete message will be displayed. 6. Release both the accelerator and brake pedals. 7. The Service: Oil reset complete message will no longer be displayed. 8. Rotate the key to the off position. For vehicles with push-button start, press the start button to turn the vehicle off completely. 1. Into - 0:01 2. Step 1 (Apply Parking Brake) - 0:06 3. Step 2 (Lift Vehicle) - 0:41 4. Step 3 (Remove Oil Filler Cap) - 1:34 5. Step 4 (Remove Underbody Shield) - 1:44 6. Step 5 (Remove Oil Drain Plug) - 2:02 7. Step 6 (Replace Oil Drain Washer) - 2:50 8. Step 7 (Install Oil Drain Plug) - 4:04 9. Step 8 (Remove Oil Filter) - 4:39 10. Step 9 (Install New Oil Filter) - 5:50 11. Step 10 (Torque Oil Drain Plug) - 6:15 12. Step 11 (Clean Excess Oil / Install Underbody Shield) - 6:32 13. Step 12 (Add 5w-30 Oil (5 QT)) - 6:51 14. Step 13 (Install Oil Filler Cap) - 7:09 15. Step 14 (Start Vehicle for 30 seconds) - 7:14 16. Step 15 (Add Last Amount of Oil (0.7QT)) - 7:33 17. Step 16 (Lower Vehicle) - 8:10 18. Step 17 (Verify Oil Level) - 8:24 19. Step 18 (Release Parking Brake) - 9:20 20. Step 19 (Reset Oil Life Monitoring System) - 9:38 21. Step 20 (Dispose of Old Oil) - 10:19 Products Used: This video contains affiliate links for which I may receive compensation. Pennzoil Ultra Platinum Full Synthetic 5W-30 Motor Oil - https://amzn.to/4qQ5gWL Motorcraft - Oil Filter (FL910S) - https://amzn.to/4pJhbop Oil Drain Plug Washer (F5TZ-6734-BA) - https://amzn.to/4pH2gLB Car Magnetic Oil Drain Plug - https://amzn.to/456Mlie 7QT Drain Pan - https://www.walmart.com/ip/Hyper-Toug... Funnel - https://www.walmart.com/ip/Hyper-Toug... Oil Filter Wrench - https://www.walmart.com/ip/Hyper-Toug... Tools: 3/8" Socket Wrench 10mm Socket 13mm Socket 15mm Socket Drain Pan Flathead Screwdriver Funnel Jack Stands Oil Filter Wrench Safety Glasses Service Jack Shop Towels T27 Torx Torque Wrench (20 ft-lb) Disclaimer: Content produced from Mcgurr Entertainment is for entertainment purposes only. This information is not endorsed by any agency/company (such as Ford) and is intended as an entertainment. Mcgurr Entertainment assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All content on YouTube is provided in good faith; however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on YouTube. Use this information at your own risk. #OilChange #Fusion