Automower Charging Station Blocked & Charging Station Error Caused By Charging Current Supervisor

If your Husqvarna Automower was given a software update after the fall of 2021 then it has the new charging current supervisor feature. This is a feature that Husqvarna created in the mower's software to help protect the Automower's batteries while charging. The way it works is the mower will come into dock in the charging station and when it parks it will be looking to sense at least 80% of the charging current that it needs to properly charge the battery or batteries. If it does not sense at least 80% of the charging current it requires, it will then leave the charging station and attempt to dock again to see if there is a change in the amount of current it senses. It will dock and leave the charging station up to 8 times before it finally gives up and sends an error message. There are 2 different errors that can be given by the mower when it experiences this issue. One is the charging station blocked error and the other is charging station error 30. The purpose of this feature being installed in the mower's software is to prevent damage to the Automower's battery and extend the eservice life of the battery (Or batteries depending on the model). If you are looking to purchase an Automower, looking for Automower parts & accessories, or in need of tech support, please visit www.roboticmowerservices.com or send us an email at [email protected] #Automower #RoboticMowerServices #husqvarna Husqvarna Automower 115H 310 315 315X 430X 430XH 435X 450X 450XH 520 520H 535AWD 550 550H EPOS