Ford Explorer 94 V6 Módulo Ignição Bobina Virabrequim

In this other video, I present more details of the CKP and diagrams of its connection:    • Ford Explorer 4 0 V6 Brasil Módulo Ignição...   ====================================== In this video, I present the original connections for the ignition module (IGN - Ignition Module), located on the front right of the 1994 Explorer. The emphasis is on the connections of the module with the ignition coil (coil pack, spark plug coil) and with the crankshaft position sensor (CKP), located on the lower front part of the engine, next to the main pulley (of the crankshaft). Basically, looking at the module ALREADY DISCONNECTED, as seen in the video, from top to bottom (thinner wires), the 5th wire (dark blue) is connected to the sensor closest to the engine (inside), while the 6th wire (dark gray) is connected to the sensor "outside," towards the bumper. As for the three thicker yellow wires that go to the coil: -the central one (with a white stripe) is also the central one in the coil; -the one that is furthest from the outside in the module (with a red stripe) is furthest inside in the coil (next to the red power supply wire); -the one that is furthest IN the module (black stripe) is furthest OUT in the coil. The thickest red wire coming out of the module is the "permanent" positive wire, which comes from #87 of the ignition/contact relay, and is also connected to the thickest red wire in the coil. I also show the correct connection/position of the spark plugs with the cylinders.