How to make this simple Bracelet | Handmade Jewelry Making

Come and watch the process as I braid this handmade bracelet from silver and copper wire: I found a silver spoon at a flea market and melted it down in my workshop. I used my rolling mill and my draw plate to make a long silver wire out of the melted silver. I then used a drill to twist the silver wire into a double silver wire. I did the same with a copper wire. Then I braided the 2 twisted wires, so that the silver and copper wires were braided into each other. I then hammered the braided bracelet into a tight shape after I had cut off the excess wire ends. Afterwards I sawed the ends of the bracelet so that it fit my arm. I then bent the bracelet in my bracelet bender (which is an old wooden table leg). Then I took a flat silver plate and twisted 2 ends around each end of my bracelet, so that there were some silver ends that I could use for the bracelet. Afterwards I soldered the 2 silver ends on the silver and copper bracelet and cleaned the bracelet of soot and solder residue in 14% sulfuric acid. While I was waiting for the bracelet to be deacidified, I started making a copper ring - made of 8 copper wires that I had lying around in the workshop. I braided the 8 wires - 2 and 2 - so that it became a nice braided pattern of copper. Then I bent the ring around a mandrel so that the copper ring fit my finger. Afterwards I sanded and polished it. It turned out quite nice, that copper ring. Finishing the silver and copper bracelet: I took the bracelet out of the acid and rinsed it in water. Afterwards I sanded with sandpaper and polished with polishing paste so that the bracelet shone - a fantastic result was this fine silver and copper bracelet. #makingbracelets #diyjewelry #silverjewelry #silverbracelet #copperjewelry Chapters: 0:00 intro 0:06 Melting a silver spoon for the bracelet project 2:26 Twisting copper bracelet for the Bracelet 3:20 The proces of braiding the silver and copper wire 4:53 Grinding and bending the braided bracelet 6:16 Making silver end caps for the bracelet 9:08 Making a easy braided copper ring 11:47 Presentation of the braided silver and copper bracelet Subscribe for more My Projects - videos:    / @my-projects   If you want to be se how I made another Silver and Copper bracelet Cuff, you might want to watch this video: Cool CUFF Bracelet Making - NO Solder - In My Workshop:    • Cool CUFF Bracelet Making - NO Solder - In...   The video is made for entertainment purposes. Thank you for watching and your support. Best, Bjorn