Huge Roped Hydraulic AS Aufzüge MRL Car Lift in Olten, Switzerland

Timestamps: 0:00 intro 0:26 normal ride 3:14 logic cabinet / hydraulic drive 5:09 car top / lift shaft This lift is situated in a mixed use building and is used to access the underground car park. It was installed in 2017 together with the new car park. Interestingly it does not have a motor room: The hydraulic unit fits inside the shaft pit next to the lift because of the huge size of the car. The logic and emergency release are situated in an MRL cabinet on the lowest floor. The main contactors for the pump are located in an additional cabinet above the pump in the shaft. Furthermore the upper car park floor (-2) stretches over two floors, since -1 does not exist in the car park (It exists in the building though). The 3 rubber bars on the walls of the lift car are additional buttons for the 3 floors that can easily be pressed out of the car window. They are connected to pneumatic hoses that activate electronic switches on the car roof. Manufacturer: AS Aufzüge, 2017 Capacity: 46 persons / 3500 kg Type: Hydraulic, roped 1:2 Floors: 3: -3, -2, 0 Fixtures: Schaefer MT42 Speed: 0.37 m/s up / 0.27m/s down Travel height: 8.2m Logic: NewLift FST-2XT Motor: Bucher Hydraulics, 71.7 kW WARNING/DISCLAIMER: DO NOT attempt to copy anything shown in the video without having the proper knowledge of how to do so! LIFT SHAFTS and MACHINE ROOMS are very DANGEROUS places and are NOT MEANT to be accessed by inexperienced or untrained personnel! Dangers in these environments include but are not limited to crushing, electrocution, falling and burns.