Como deixar seu piso antiderrapante com Paloma Cipriano

In today's video, @PalomaCipriano will show you how to apply a product that makes floor surfaces non-slip without altering their appearance. This product creates a film on the floor that generates friction even when it's wet. It's great for preventing accidents and even for your pets in the long term, benefiting their joint health. Ideally, you should test it on a small area to determine how long you need to let the product act to obtain maximum friction with minimal alteration of the floor's appearance, preventing it from becoming dull. The first step is to apply the liquid to an area of ​​up to 2 square meters so that rinsing can be done in time. Do this by pouring the product into a container; never put it directly on the floor. Spread it with a damp mop, sliding the product over the desired area, and let it act for the time you determined in the test. If you find that the action time is too short, dilute the product half and half with water. This is usually necessary for porcelain and polished marble. Next, scrub the floor with a soft-bristled broom, as if you were washing it. Rinse with plenty of water and remove all excess product from the floor. That's it! You can now walk on it, because it will no longer be slippery. Remember that this product is not recommended for surfaces made of Paviflex, epoxy, paint, or resins. So, guys! Did you like this step-by-step guide? Don't forget to comment below what you thought of the video! List of necessary materials: Anti-slip film: https://tinyurl.com/5522f8ru Brush: https://tinyurl.com/2vdderz5 Sponge: https://tinyurl.com/48wm9p3e Glove: https://tinyurl.com/2p8k67n7 Squeegee: https://tinyurl.com/yvk24h3a Bucket: https://tinyurl.com/4wkmwkh5 Broom: https://tinyurl.com/y8sdn38u 00:00 - Introduction 00:17 - Product advantages 00:31 - Test before! 01:05 - Step by step 02:11 - Result #casadeverdade #palomacipriano