How to Measure Surface Profile by Replica Tape - Also Known as Surface Roughness

Surface preparation is the essential first stage treatment of a steel substrate before the application of any coating and is generally accepted as being the most important factor affecting the total success of a corrosion protection system. The performance of a coating is significantly influenced by its ability to adhere properly to the substrate material. Residual mill scale on steel surfaces is an unsatisfactory base to apply modern, high-performance protective coatings and is therefore removed by abrasive blast cleaning. Other surface contaminants on the rolled steel surface, such as oil and grease are also undesirable and must be removed before the blast cleaning process. The surface preparation process not only cleans the steel but also introduces a suitable profile to receive the protective coating. Click these links to watch a more valuable video of protective coating or painting; 👉   • Salt Testing by Salt Contamination Meter P...   👉   • DFT Meter — Paint Thickness Meter — How to...   👉   • 🆕Spray Painting Anti Rust Painting Video -...   👉   • Salt Test, Soluble Salt Test Method — How ...   You can learn more about the coating by clicking this link; 👉 https://www.iogs.org/protective-coating If you wish to get certificated Coating Inspector Level 2 Click this link 👉https://www.iogs.org/coating-inspecto... You can enroll in the level 2 protective coating inspector course by clicking this link; 👉https://www.iogsinternational.org/cou...