Haltech IC-7 Installed In The Evo… Except for One Problem | Evo 8 Build Part 8

Today we finish some maintenance, clean up the last wiring from the Haltech ECU to the secondary pump relay, and install the final major piece of the puzzle before tuning: the Haltech IC7 digital dash. We mounted it with an Ohm Racing mounting bracket, built a small custom harness to tie into the factory cluster wiring, and tried to bring it to life… …but the dash had other plans. This episode ends on an unexpected cliffhanger... Everything is installed, but the IC7 refuses to power on. Still, huge progress: wiring is nearly complete, the interior is coming together, and we’re sooo close to first startup. Next week: diagnosing the dash issue and pushing toward tuning. Make sure you’re subscribed so you don’t miss the breakthrough. #BoostNFriends #Evo8 #Haltech #IC7Dash #EvoBuild #BNF #MitsubishiEvo #JDMBuild #4G63 #CustomWiring #TurboEvo #ProjectCar #CarBuild #DigitalDashUpgrade Music from #Uppbeat https://uppbeat.io/t/mountaineer/chip... License code: HL60JDWJYDBJ9BMT 00:00 Intro / Today’s Plan 01:49 Finishing Maintenance & Prep 02:52 Wiring ECU → Second Fuel Pump Relay 06:04 Unboxing the Haltech IC7 Dash 08:09 Ohm Racing Mount 10:12 Building a Custom IC7 Harness 12:39 Installing the Dash Into the Cluster 14:55 Moment of Truth… It Won’t Turn On 16:04 What Happens Next / Outro