Stucco Veneziano - Trowelled Effect by San Marco

Application video of Stucco Veneziano - Trowelled Effect from San Marco Tools: stainless steel trowel Coats: 2 base coat + 1 finish Dilution: ready to use Spreading rate: to finish: 1-1,4 kg/m² on plaster; 0,4-0,6 kg/m² on smooth surfaces Dilution: ready to use Application Process: Apply coat of DECORFOND diluted at 30-35% with water, by brush or roller, in order to obtain an ideal support for the application. Apply 2 coats of the product using the trowel, filling and levelling in order to obtain a smooth and even surface. Allow 5 hours between one application and the next. Sand the surface with appropriate grit size sanding paper after first and second coat. Apply the finishing coat using stainless steel trowel. This operation can be performed by taking only a small amount of the product at a time and applying it with overlapping movement and compressing it to create desired effect. After 5 minutes, the surface can be polished, repeatedly passing the trowel back and forth in an oscillatory motion, pressing on the surface. In order to enhance the level of gloss of the finish, it is recommended that the surface is sanded with extremely fine abrasive paper (e.g. M-1500) and subsequently to repeat the polishing procedure.