Múltiple de escape Vento 1.6L

TOOLS NEEDED FOR THIS JOB: Jack and jacks 3/8" ratchet 1/4" ratchet 12mm long socket 3/8" extensions 10mm socket 16mm long socket 7mm socket 7/8" wrench 12mm wrench T-30 bit M-10 bit TORQUE SPECIFICATIONS: M-10 bolts: 22 ft/lb Catalytic converter lower nuts: 25 ft/lb Manifold nuts: 22 ft/lb Heat deflector bolts: 12 ft/lb Oxygen sensor: 27 ft/lb Hey, folks! In this video, we replace the exhaust manifold on this Vento with the 1.6L engine, because it was already broken. Haha. I tried welding it, but it just wouldn't work and the noise kept coming. So we had to replace it, and the problem was solved. A fairly simple and fun task. ✅Exhaust manifold: https://listado.mercadolibre.com.mx/m...[A:múltiple%20de%20escape%20vento] ✅Other engine and tune-up videos:    • Motor   My social media: → Facebook:   / avilamk2108   → Instagram:   / avilamk2108   → TikTok:   / avilamk2   Like and subscribe, it's free 👀 Tips for mechanics: Wear protective eyewear. Wear gloves (believe me, you'll thank me for it). Before starting to work on the suspension, apply WD-40 to the bolts. Use threadlocker (blue) on the bolts so vibrations don't strip them over time. Get a breaker bar. Invest in a tool; it's the best thing you can do. Always keep your tools organized. Cleanliness in your workshop is paramount. Never leave a caliper hanging. Always have a snack available. If you're just starting out, use your phone to take photos of your process so you don't get lost when assembling ;). Always mark your bolts to make sure they don't loosen. Although the spark plugs come pre-calibrated, it never hurts to double-check. Before leaving on a trip, check your levels. Subscribe to Avila Mk2. Always use the tool for what it was designed for. Invest in a tool Measure twice to cut once. Never loosen a 3/4" drive with a 1/4" ratchet. Keep an eye on the 10mm. Protect your ears. Calibrate your torque wrench. Organize your parts. Learn about new materials. Use an inspection light. Properly align wheels. Test drive after repair. Know the tightening sequence. Have a magnetic extender. Investigate recurring problems. Label your tools. Protect yourself against chemicals. Keep a maintenance log. Always test the battery. Make efficient use of space. Drink water. Disclaimer: Since there are factors beyond AvilaMk2's control, I cannot guarantee against improper use or unauthorized modification of this information. AvilaMk2 is not responsible for any property damage or injury that may arise as a result of the information provided in this video. Use this information at your own risk. AvilaMk2 recommends safe practices when working on vehicles and/or with tools shown or implied in this video. Due to factors beyond AvilaMk2's control, the information presented in this video does not guarantee specific results, either expressly or implied. Any damage, injury, or loss that may result from the improper use of these tools, equipment, or the information provided in this video rests solely with the user and not with AvilaMk2.