Making a Straight Edge (south bend part 2)
In this video I show you how I made a straight edge without a reference device, using nothing more than a three lengths of mild steel a few hand tools and lots of time. The straight edge is an instrument I need to help me check out the Vee ways on my south bend lathe how I do this will be on my next video.
▶︎
Making a straight edge blank Part 1/2
▶︎
Mapping the South bend Lathe slideways (Part 3)
▶︎
How I made my own granite surface plate
▶︎
Slide fix, South Bend 13 (pt5)
▶︎
Hints on making Straight Edges out of Steel
▶︎
I need a PRECISION straight-edge, so I made three
▶︎
Scraping a Camelback Straight Edge Flat
▶︎
MOORE Pattern Scraping a Straight Edge
▶︎
The Genius of Sweden’s Turretless Tank – Aiming With Suspension
▶︎
Scraping the Gingery Lathe Bed Flat (and cheating) | Gingery Lathe Part 2
▶︎
Scraping a 54" Straight Edge
▶︎
Whitworths 1862 Slotting Machine
▶︎
ROBRENZ ATD #1 INTRO, 3 PLATE METHOD
▶︎
Hand Scraper Part 1: Overview of the Design
▶︎
Making a Following Steady
▶︎
Repeat O Meter
▶︎
Lapping Plates using the Whitworth 3 plate method.
▶︎
My DIY Surface Plate
▶︎
Camelback Straight edge.
▶︎