Carvera Air CNC: Custom CNC-Milled Pen | Full Design & Pen Turning Process + Assembly

This video is NOT a sponsored video. In this video, I take you through my entire process of designing and machining a custom pen using the Carvera Air CNC. From cutting and boring blanks to turning the pen body with a 4th axis rotary setup, I walk through each step using a 7mm Slimline Pen Kit and 1/2" Acetal Copolymer (Delrin) rods. You'll see: Cutting the blanks Boring the center hole for brass insert tubes with a chuck vise Assembling and squaring the blanks Mounting and turning on the rotary 4th axis with a pen mandrel Polishing, finishing, and assembling the pen with a Satin Silver Pen Kit 🔧 Materials & Tools Used: Acetal Copolymer Rods: https://a.co/d/2SendOu 7mm Pen Kits: https://a.co/d/1jNKtmy Pen Mandrel & Accessories: https://a.co/d/hkGSEJG Blank Squaring: https://a.co/d/0dN3Frv 3-Jaw Self Centering Lathe Chuck: https://a.co/d/0F5edp4 Bits Used: 1/8" Bit: I used the Makera for Plastic 3.175x25mm Bit Finishing Bit: https://a.co/d/8g4ba6j Software: CAD: onShape CAM: vCarve Desktop Pro Controller: Community Firmware version of Carvera Controller I use the Community Firmware & Controller for Carvera Air https://github.com/Carvera-Community 📐 Designed for both beauty and precision, this is a great project to showcase what’s possible with a compact CNC and quality materials. 👍 Like, comment, and subscribe if you enjoy CNC projects and pen turning content! __________________________________________________________ Enjoy The Video! See my other CNC & 3D Printing related project videos at    / @gabrielmakesthings   Download my 3D Print Files for Free at https://makerworld.com/en/@GabrielMaker ________________________________________________________ If you download and use my files please leave a positive rating, a like and a boost if possible. Thanks! #CarveraAir #PenTurning #4thAxis #DIYPen #CNCmachining #CNCPen #DIYPen #4thAxisCNC #MakerProject #CNCDesign #CustomPen #PenMaking #RotaryCNC #PenLathe #CNCTurning #CNCProjects