Оверлок Gemsy 1D не работает. Снимаем крышки, находим неисправности. Ч.1. Видео № 740.

My RUTUBE https://rutube.ru/channel/33121931/ Repair by Master Universal. The Gemsy 1D overlocker isn't working. Removing the covers and troubleshooting. Part 1. Video #740. Repair description in this video: 00:01 min. - The knives aren't cutting and are jamming the material. 01:04 min. - The motor is loose and won't stay in place. 01:36 min. - The thread guide on the presser foot is incorrectly adjusted. The left looper is clogged. 02:19 min. - Removing the covers, presser foot, needle plate, and stitch plate. 07:45 min. - How to remove the belt and pulley. 09:30 min. - How to install the pulley correctly. 10:50 min. - How to remove the tray. 12:06 min. – How to secure the electric drive and install the belt. Watch all repair videos for this machine here:    • Оверлок Gemsy 1D не работает. Снимаем крыш...   Each video has its own serial number. For making bindings, individual questions, and consultations, please email: [email protected] Instructional video page: Do it yourself! http://vadelina.ru/dlya-tekh-kto-shet/ Jigs for sewing in long zippers. Jigs for edging fabric edges with bias tape. Jigs for making bias tape. Double-folding hem. DIY bindings: for EVA car mats, tri-fold, quadruple, for difficult-to-slide faux leather materials, see here http://vadelina.ru/dlya-tekh-kto-shet/ Double-feed sewing machine with walking foot: Installing the shuttle, factory needle bar adjustment http://vadelina.ru/ustanovka-chelnoka... Adjusting the overstitching. Adjusting the walking foot eccentrics and feed dog http://vadelina.ru/kak-otregulirovat-... Industrial sewing machine class 862: http://vadelina.ru/dlya-tekh-kto-shet/ How to install and adjust the upper thread tension and release mechanism. How to adjust the feed and lift eccentric. How to replace the bronze gear and bearing on the shuttle shaft. How to install and adjust the shuttle. How to install and adjust the shuttle takeoff. Typical GK 6150H and other similar machines: see here http://vadelina.ru/kak-postavit-cheln... How to install the shuttle, reset the needle bar to factory settings, and adjust the eccentric. On the Typical GK 6150H and other similar machines. Adjusting the Podolsk sewing machine for thick leather and thick shoe threads. Supplement to adjusting the Podolsk machine for thick threads and thick leather. Setting up the Chaika 142M and Podolsk 142 machines for thick leather and thick shoe threads, See here: http://vadelina.ru/dlya-tekh-kto-shet/ How I live and what I do: DIY: see here:    • сделай сам   On our property: see here:    • у нас на участке   Our YouTube channel Everything about everything in Our House: see here:    / @ВсепровсевНашемдоме   For English-speaking viewers. Description of the repair in this video: 00:01 minutes - The knives do not cut, they chew the material. 01:04 minutes - The engine dangles does not hold. 01:36 minutes - The thread guide is not correctly positioned on the foot. Left looper clogged. 02:19 minutes - Remove the covers, foot, needle, plate. 07:45 minutes - How to remove the belt and pulley. 09:30 min. - How to install the correct pulley. 10:50 minutes - How to remove the pallet. 12:06 minutes - How to fix the electric drive and put on the belt.