Часть 1.Набор для самостоятельной сборки. Miron63 ESR_LCF m63-v3.4h

❗❗IMPORTANT INFORMATION ❗❗ Before ordering, first read here 👇 http://moemesto.ru/MIRON63/file/14701... ⚠️IF IT DOESN'T OPEN ABOVE ⚠️ then read here👇 https://disk.yandex.ru/i/eZnX5mUQq9IfSg 📬Author's email 👇 [email protected] 🔴[Part 1.] DIY kit. Miron63 ESR_LCF m63-v3.4h 👇    • Часть 1.Набор для самостоятельной сборки. ...   🔴[Part 2.] DIY kit. Miron63 ESR_LCF m63-v3.4h 👇    • Часть 2.Набор для самостоятельной сборки. ...   🔴FINAL - SETUP. DIY kit. Miron63 ESR_LCF m63-v3.4h👇    • ФИНАЛ - НАСТРОЙКА .Набор для самостоятельн...   🔶🔶🔶🔶🔶🔶🔶🔶🔶🔶🔶 Functional overview + in-circuit measurements. 👇 ESR_LCF_V3.4h in-circuit meter. LCF tester miron63, Miron's tester. Stepan Mironov. 🔴(Part 1)    • (Часть 1) Внутрисхемный измеритель ESR_LCF...   🔴(Part 2)    • Video   🔴(Part 3 - Finale)    • Video   🔴(EPILOGUE - Summary) Miron63 vs. XJW01 vs. MASTECH (MS8911). Test + Comparison. In-circuit measurements! 👇    • Video   🔴 (Finding a short circuit using m63-v3.4h) 👇    • Video   📣‼️Comparison of the free and commercial versions of the meter! ‼️👇    • Esrv3 и ESRv34   🏠Author's website http://moemesto.ru/MIRON63 🎥Author's channel    / @user-ig2wt7wc2w   📬For orders, email the author [email protected] The analyzer detects nonlinear sections when charging the measured capacitor (a healthy capacitor charges linearly). The expected deviation is then mathematically calculated and added to the ESR(Rx) value = aESR(a). The display additionally displays the value "a0.00 ohms." This ESR (resistance) is most effective for values ​​below 1.5 ohms. In cases where there is no data for the analyzer, the display shows “a….”.