Shame on You Powermatic | Wood Talk 600

Sponsored by Woodcraft! https://www.woodcraft.com/start And by the generous contributions of our patrons:   / woodtalk   It’s show #600 - On today’s show, we’re talking about color matching, tigerwood workbench, and wood on a metal lathe. What's on the Bench Marc is making a book press. Matt is starting on his breakfast bench project. Shannon blew up his other knee while doing a sawing demo. He is OLD! Kickback Paul recommends FreeCAD as a SketchUp alternative that he finds similar to many of the higher powered solutions on the market. Hamilton gravitated to wax finishes due the safety and health aspects as he found so many other finish products had harmful VOC levels. Dick says, "yep that's actually my name", and "yes, its normal sized" Questions Bob asks about using color and toning finishes as all his experience lies in clear coat finishes. Greg asks about the differences between metal and wood lathes and what will suit his needs. Amy has a bunch of Tigerwood 1x6 laying around and asks about using it for a workbench. Store Events: Don’t miss Alex Snodgrass’ Next Cut Tour: https://www.woodcraft.com/pages/alex-... 2/20-2/21 - Orlando 2/22-2/23 - Clearwater 2/24-2/25 - Birmingham 2/26-2/27 - Atlanta Woodcraft often has local club meetings in their stores too! Virginia Beach, VA: Tidewater Woodworkers Guild Meeting Monday, February 23 Dayton, OH: Miami Valley Wood Carvers Carve-in, Tuesday, February 17 Ask Us a Question Our questions primarily come from our generous Patrons. You can also send in questions via the contact form: https://woodtalkshow.com/questions/ Or you can hit us up on Instagram at:   / woodtalkshow   And you can even send us an email or voicemail at [email protected] Finally, you can find us individually at @MattCremona-zo4cc, @woodwhisperer, and @RenaissanceWW ​