LET'S BUILD AN NDAA FPV DRONE | Episode 7: Installing the Foxeer Predator v5 FPV Camera...

After plenty of troubleshooting, struggling, and comfort food -- I have finally figured out for you how to integrate the Foxeer Predator v5 FPV camera into the ORQA FPV F405 flight controller. Despite my struggles, it turns out it's not all that difficult. Get ready for what will probably be the last bit of soldering required for this build and make sure you bring some heat shrink too! We'll be soldering two different JST connectors together to allow our camera to talk to our flight controller. After that, it's just a matter of plugging in and seeing if we get video feed from our VTX's video transmission. Will it work or will it flop? Let's find out! Let's Talk Drones! LINKS TO PARTS: Frame - https://tinyurl.com/5a2pcp6x Chinese Motors - https://tinyurl.com/4r27s27n USA Motors - https://tinyurl.com/p7drm6de ESC - https://tinyurl.com/5yt2kb8e FC - https://tinyurl.com/5n78ybf8 RX/TX - https://tinyurl.com/499z5bnf VTX - https://tinyurl.com/efxv8tku Camera - https://tinyurl.com/yzh6vuwn ALL THE DRONE GEEK LINKS: Blog: https://www.thedronegeek.com Facebook:   / thedronegeekfb   Instagram:   / thedronegeek   Twitter:   / thedronegeekpa   YouTube:    / thedronegeek   PART 107 TEST PREP W/ PILOT INSTITUTE: https://learn.pilotinstitute.com/a/af...